apply policy
Syntax
apply policy <POLICY-NAME> routed-in
no apply policy <POLICY-NAME> routed-inDescription
Applies a classifier policy containing a PBR action to an interface. A policy with PBR actions is only applicable to L3/routing interfaces.
The
no form of this command removes a classifier policy containing a PBR action from an interface.
Command context
config-if
Parameters
<POLICY-NAME>Specifies name of the policy.
Authority
Administrators or local user group members with execution rights for this command.
Restrictions
Only Layer 3 interfaces are valid for PBR policy application, and only in the routed inbound direction.
If a policy with an 'interface tunnel' PBR action is applied on a Layer 3 interface in VRF 'A', and that interface tunnel is a member of VRF 'B', the interface tunnel is considered down/unavailable in this policy application in VRF 'A'.
Example
On the 6400 Switch Series, interface identification differs.
Apply policy to an interface:
switch(config)# interface 1/1/10
switch(config-if)# routing
switch(config-if)# apply policy pbr_policy routed-in
switch(config-if)# exit