`show ip ecmp`

Syntax

show ip ecmp [vsx-peer]

Description

Displays the Equal Cost Multipath (ECMP) configuration.

Command context

Operator (>) or Manager (#)

Parameters

[vsx-peer]: Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Usage

On the Aruba 8400, the following fields are enabled by default and cannot be excluded: Source IP, Destination IP, Source Port, Destination Port.

Examples

switch# show ip ecmp

ECMP Configuration
---------------------

 ECMP Status        : Enabled

ECMP Load Balancing by
------------------------
 Source IP          : Enabled
 Destination IP     : Enabled
 Source Port        : Enabled
 Destination Port   : Enabled