neighbor activate

Description

This command enables the address-family capability and exchange of information specific to an address family with a BGP neighbor.

The no form of this command removes the address-family capability and disables the exchange of routes for the specified address-family with the BGP neighbor.

Command context

config-bgp-ipv4-uc

config-bgp-ipv6-uc

config-bgp-l2vpn-evpn

Parameters

<IP-ADDR>

Specifies an IP address in IPv4 format (x.x.x.x), where x is a decimal number from 0 to 255, or IPv6 format (xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx), where x is a hexadecimal number from 0 to F.

Authority

Administrators or local user group members with execution rights for this command.

Examples

switch(config-bgp-ipv4-uc)# neighbor 1.1.1.1 activate
switch(config-bgp-ipv4-uc)# no neighbor 1.1.1.1 activate

switch(config-bgp-l2vpn-evpn)# neighbor 1.1.1.1 activate
switch(config-bgp-l2vpn-evpn)# no neighbor 1.1.1.1 activate