show ipv6 ospfv3 virtual-links

Description

Displays the current state and parameters of the OSPFv3 virtual links.

Command context

Operator (>) or Manager (#)

Parameters

<instance-tag>

Enter an OSPFv3 Process ID to display information on the OSPFv3 virtual links for the particular OSPFv3 process. Range: 1 to 63.

brief

Select to display brief overview information for the OSPFv3 virtual links.

all-vrfs

Select to display OSPFv3 virtual links information for all VRFs.

vrf <vrf-name>

Specifies the name of a VRF. Default: default.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

Show OSPFv3 virtual links information:

switch# show ipv6 ospfv3 virtual-links
Virtual link to router 40.40.40.40 is up
-----------------------------------------

Process ID 21 VRF default, Transit area 0.0.0.1
Transit delay 1 sec
Timer Intervals: hello 10, dead 40, retransmit 5
No authentication
Number of Link LSAs: 0, checksum sum 0
4 state changes

Show brief overview information for OSPFv3 virtual links:

switch# show ospfv3 virtual-links brief
OSPFv3 Process ID 1 VRF default
==============================

Total Number of Virtual Links: 1

Remote Router   Transit Area    Status
--------------------------------------
2.1.1.2         0.0.0.1         down