object-group ipv6 address

Description

Creates an IPv6 address object group comprised of one or more address entries. Address groups are used solely as a shorthand way of specifying groups of addresses in the ACEs that make up ACLs. IPv6 address groups can be used only in the access-list ipv6 command. Entering object-group ipv6 address with an existing address group name, enables you to modify an existing address group.

The no form of this command deletes the entire address group or deletes a particular address group entry identified by sequence number.

Command context

config

The object-group ipv6 address command takes you into the named address group context (with prompt switch(config-addrgroup-ipv6)#) where you enter the addresses.

Parameters

<OBJECT-GROUP-NAME>

Specifies the address object group name.

<SEQUENCE-NUMBER>

Specifies a sequence number for the address entry. Range: 1 to 4294967295. When omitted, a sequence number 10 larger than the current highest sequence number is auto-assigned. Default auto-assigned sequence numbers are 10, 20, 30, and so on.

<IP-ADDRESS>[/{<PREFIX-LENGTH>|<SUBNET-MASK>}]

Specifies the IPv6 address.

• <IP-ADDRESS> - specifies the IPv6 host address.

  • <PREFIX-LENGTH> - specifies the address bits to mask (CIDR subnet mask notation). Range: 1 to 128.

  • <SUBNET-MASK> - specifies the address bits to mask (dotted decimal notation).

Authority

Administrators or local user group members with execution rights for this command.

Examples

Creating an IPv6 address group with two entries:

switch(config)# object-group ipv6 address my_ipv6_addr_group
switch(config-addrgroup-ipv6)# 10 1000::1
switch(config-addrgroup-ipv6)# 20 1000::2
switch(config-addrgroup-ipv6)# exit
switch(config)# show object-group
Type       Name
  Sequence L4 Port(s)/IP Address
-------------------------------------------------------------------------------
IPv6       my_ipv6_addr_group
        10 1000::1
        20 1000::2

Adding an entry to an existing IPv6 address group:

switch(config)# object-group ipv6 address my_ipv6_addr_group
switch(config-addrgroup-ipv6)# 30 1000::3
switch(config-addrgroup-ipv6)# exit
switch(config)# show object-group
Type       Name
  Sequence L4 Port(s)/IP Address
-------------------------------------------------------------------------------
IPv6       my_ipv6_addr_group
        10 1000::1
        20 1000::2
        30 1000::3

Removing an entry (20) from an existing IPv6 address group:

switch(config)# object-group ipv6 address my_ipv6_addr_group
switch(config-addrgroup-ipv6)# no 20
switch(config-addrgroup-ipv6)# exit
switch(config)# show object-group
Type       Name
  Sequence L4 Port(s)/IP Address
-------------------------------------------------------------------------------
IPv6       my_ipv6_addr_group
        10 1000::1
        30 1000::3

Removing an IPv6 address group:

switch(config)# no object-group ipv6 address my_ipv6_addr_group
switch(config)# show object-group
No object group found.