Object group-related tasks
Object groups are useful for defining groups of addresses and ports for use exclusively in the two ACL-defining commands
access-list ip and
access-list ipv6.
Common object group-related tasks are as follows. Simple tasks link to the relevant command description.
| Task | Command or procedure | Example |
|---|---|---|
| Creating an IPv4 address object group | object-group ip address
|
object-group ip address my_ipv4_addr_group |
| Creating an IPv6 address object group | object-group ipv6 address
|
object-group ipv6 address my_ipv6_addr_group |
| Creating a port object group | object-group port
|
object-group port my_port_group |
| Showing an IPv4 address object group | show object-group |
show object-group ip address my_ipv4_addr_group |
| Showing all IPv6 address object groups | show object-group |
show object-group ipv6 address |
| Showing a port object group | show object-group |
show object-group port my_port_group |
| Showing all port object groups as commands | show object-group |
show object-group port commands |
| Resequencing an IPv4 address object group | object-group ip address
|
object-group ip address my_ipv4_addr_group resequence 100 10 |
| Resequencing a port object group | object-group port
|
object-group port my_port_group resequence 200 5 |
| Resetting an IPv6 address object group | object-group ipv6 address
|
object-group ipv6 address my_ipv6_addr_group reset |
| Resetting a port object group | object-group port
|
object-group port my_port_group reset |