class resequence
Syntax
class {ip|ipv6|mac} <CLASS-NAME> resequence <STARTING-SEQUENCE-NUMBER> <INCREMENT>
Description
Resequence numbering in an IPv4, IPv6, or MAC class.
Command context
config
Parameters
{ip|ipv6|mac} <CLASS-NAME>
Specifies the class where you want to resequence class entries.
<STARTING-SEQUENCE-NUMBER>
Specifies the sequence number to start resequencing from.
<INCREMENT>
Specifies how much to increment the sequence numbers by.
Authority
Administrators or local user group members with execution rights for this command.
Examples
Resequencing an IPv4 class:
switch(config)# class ip MY_IP_CLASS resequence 1 10 switch(config)# do show class Type Name Sequence Comment Action L3 Protocol Source IP Address Source L4 Port(s) Destination IP Address Destination L4 Port(s) Additional Parameters ------------------------------------------------------------------------------- IPv4 MY_IP_CLASS 1 match igmp any any 11 ignore udp any any 21 match tcp 192.168.0.1 192.168.0.2
Resequencing an IPv6 class:
switch(config)# class ipv6 MY_IPV6_CLASS resequence 1 1 switch(config-class-ipv6)# exit switch(config)# do show class Type Name Sequence Comment Action L3 Protocol Source IP Address Source L4 Port(s) Destination IP Address Destination L4 Port(s) Additional Parameters ------------------------------------------------------------------------------- IPv6 MY_IPV6_CLASS 1 match any any 1020:: 2 ignore udp any any
Resequencing a MAC class:
switch(config)# class mac MY_MAC_CLASS resequence 1 1 switch(config)# do show class Type Name Sequence Comment Action EtherType Source MAC Address Destination MAC Address Additional Parameters ------------------------------------------------------------------------------- MAC MY_MAC_CLASS 1 match any any any 2 ignore arp any any