show ipv6 pim6 neighbor
Syntax
show ipv6 pim6 neighbor [<IPv6-ADDR>]
[all-vrfs | vrf <VRF-NAME>] [vsx-peer]
Description
Shows PIM neighbor information. Optionally, you can specify display information by VRF. If no options are specified, it shows information for the default VRF.
Parameters
<IPv6-ADDR>
Optional. Shows PIM neighbor information for the specified IPv6 address.
all-vrfs
Optional. Shows PIM neighbor information for all VRFs.
vrf <VRF-NAME>
Optional. Shows PIM neighbor information for a particular VRF. If the
<VRF-NAME>
is not specified, it shows information for the default VRF.[vsx-peer]
Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.
Authority
Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.
Example
Showing PIM neighbor information:
switch# show ipv6 pim6 neighbor PIM Neighbor VRF : default IP Address : 2001::02 Interface : 1/1/1 Up Time (sec) : 0 Expire Time (sec) : 0 DR Priority : 44