bfd detect-multiplier
Syntax
bfd detect-multiplier <MULTIPLIER>
no bfd detect-multiplierDescription
Sets BFD detection multiplier on an interface.
The
no form of this command sets the BFD detection multiplier to the default value of 5.
Command context
config-if
Parameters
<MULTIPLIER>Specifies the BFD detection multiplier. Range: 1-5. Default: 5.
Authority
Administrators
Examples
Setting the BFD detection multiplier to 3 on interface 1/1/1:
switch(config)# interface 1/1/1 switch(config-if)# bfd detect-multiplier 3
Setting the BFD detection multiplier to the default value on interface 1/1/1:
switch(config)# interface 1/1/1 switch(config-if)# no detect-multiplier