erps ring <ringid> <port0|port1> interface
Syntax
erps ring <ringid>
<port0|port1> interface <ifname>Description
This command configures the ERPS ring member port. An L2 interface in the switch is associated to one of the two member ports of an ERPS ring.
The
no form of this command removes the association of the ring port to the L2 interface on the switch.
Command context
config-erps-ring-<ringid>
Parameters
<ringid>Required, specifies the ID of the ring. Range: 1-239
<port0>Required, set port0 of the ring.
<port1>Required, set port1 of the ring.
<ifname>Required, interface name (string).
Authority
Administrators
Examples
Configure the ERPS ring member port:
switch(config)# erps ring 3 switch(config-erps-ring-3)# port0 interface 1/1/1
Remove the association of the ring port to the L2 interface on the switch:
switch(config)# erps ring 3 switch(config-erps-ring-3)# no port0