ipv6 ospfv3 transit-delay
Syntax
ipv6 ospfv3 transit-delay <seconds>
no ipv6 ospfv3 transit-delay
Description
Sets the time delay in Link state transmission for the OSPFv3 interface.
The
no
form of this command sets the transit delay in Link state transmission to the default of 1 second.
Command context
config-if
Parameters
<seconds>
Specifies the time delay for the transit delay, in seconds. Default: 1 second. Range: 1-3600.
Authority
Administrators
Examples
Setting OSPFv3 transit delay on the interface
switch(config)# interface 1/1/1 switch(config-if)# ipv6 ospfv3 transit-delay 30
Setting OSPFv3 transit delay to default on the interface
switch(config)# interface 1/1/1 switch(config-if)# no ipv6 ospfv3 transit-delay