qos queue-profile
Syntax
qos queue-profile <NAME>
no qos queue-profile <NAME>Description
Creates a new QoS queue profile and switches to the
config-queue context for the profile. If the specified QoS queue profile exists, this command switches to the
config-queue context for the profile. A queue profile determines the priority with which queues are selected when transmitting packets on an interface.
A profile named
factory-default is defined by default and is automatically applied. It cannot be edited or deleted. Use the command
show qos queue-profile factory-default to view this profile. Do not use
show running-configuration, as it will only display changes from the initial values.
Each profile has eight queues, numbered 0 to 7. The larger the queue number, the higher its priority during transmission scheduling.
Theno form of this command removes the specified QoS profile. Only profiles that are not currently applied to an interface can be removed.
Command context
config
Parameters
<NAME>Specifies the name of the QoS queue profile to create or configure. Range: 1 to 64 alphanumeric characters, including period (.), underscore (_), and hyphen (-).
Authority
Administrators
Examples
Creating the profile myprofile:
switch(config)# qos queue-profile myprofile switch(config-queue)#
Deleting the profile myprofile:
switch(config)# no qos queue-profile myprofile