`bsr-candidate source-ip-interface`

Syntax

bsr-candidate source-ip-interface <INTERFACE-NAME>

no bsr-candidate source-ip-interface <INTERFACE-NAME>

Description

Configures the router to advertise itself as a candidate PIM-SM BSR on the interface specified, and enables BSR candidate operation. The result makes the router eligible to be elected as the BSR for the PIM-SM domain in which it operates. One BSR candidate interface is allowed per-router.

The no form of this command removes the Candidate BSR configuration.

Command context

config-pim6

Parameters

<INTERFACE-NAME>: Specifies the interface to use as a source for Candidate-BSR router IP address. Interface can be a VLAN interface (such as vlan15) or routed interfaces (such as lag 1 or 1 / 1 / 19). PIM-SM must be enabled on this interface (use the ipv6 pimv6-sparse enable command).

Authority

Administrators

Example

Configuring and removing the BSR-candidate interface:

switch(config)# router pim6
switch(config-pim6)# bsr-candidate source-ip-interface 1/1/4
switch(config-pim6)# no rp-candidate source-ip-interface 1/1/4