ipv6 pim6-sparse dr-priority

Description

Changes the router priority for the designated router (DR) election process in the current interface.

A numerically higher value means a higher priority. If multiple routes share the highest priority, the router with the highest IP address is selected as the DR.

The no form of this command removes currently configured value and sets to the default of 1.

Command context

config-if

config-if-vlan

config-lag-if

Parameters

<PRIORITY-VALUE>

Specifies the priority value to use on the interface in the DR election process. Required. Default: 1. Range: 0-4294967295.

Authority

Administrators

Examples

Configuring and removing the interface priority value:

switch(config)# interface vlan40
switch(config-if-vlan)# ipv6 pim6-sparse dr-priority 4444
switch(config-if-vlan)# no ipv6 pim6-sparse dr-priority