`show ipv6 pim6 interface <INTERFACE-NAME>`

Syntax

show ipv6 pim6 interface <INTERFACE-NAME> [vsx-peer]

Description

Shows detailed information about the PIM interface currently configured.

Command context

Operator (>) or Manager (#)

Parameters

<INTERFACE-NAME>: Specifies an interface for showing PIM interface information. Interface can also be a LAG or VLAN.
[vsx-peer]: Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Example

Showing PIM interface information for interface 1/1/1:

switch# show ipv6 pim6 interface 1/1/1

PIM Interfaces

VRF: default

Interface  : 1/1/1
IPv6 Address : fe80::a00:9ff:feec:dc0e/64
Mode       : sparse

Designated Router :
Hello Interval (sec)  : 30
Hello Delay (sec)     : 4

Override Interval (msec)  : 500               Lan Prune Delay     : Yes
Propagation Delay (msec)  : 350               DR Priority         : 3
Neighbor Timeout          : 0