`show ipv6 pim6 rpf-override source`

Syntax

show ipv6 pim6 rpf-override source <IPv6-ADDR> 
     [all-vrfs | vrf <VRF-NAME>] [vsx-peer]

Description

Shows the RPF override configuration for the specified source. Optionally, you can specify display information by VRF. If no options are specified, it shows information for the default VRF.

Command context

Operator (>) or Manager (#)

Parameters

source <IPv6-ADDR>: Specifies the RPF source IPv6 address for which RPF override is configured. Format: X:X::X:X
all-vrfs: Optional. Shows PIM RPF override information for all VRFs.
vrf <VRF-NAME>: Optional. Shows PIM RPF override information for a particular VRF. If the <VRF-NAME> is not specified, it shows information for the default VRF.
[vsx-peer]: Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Examples

Showing PIM RPF override source:

switch# show ipv6 pim6 rpf-override source 2004::02

VRF : default
Static RPF Override
Multicast Source : 2004::02/128
RPF IPv6 Address : 2002::02

Showing PIM RPF override source for all VRFs:

switch# show ipv6 pim6 rpf-override source 2004::02 all-vrfs

VRF : Red
Static RPF Override
Multicast Source : 2004::02/128
RPF IPv6 Address : 2002::02