show ip pim bsr local

Description

Shows the information about BSR candidates on the local router and multicast groups it supports. Optionally, you can specify display information by VRF. If no options are specified, it shows information for the default VRF.

Command context

Operator (>) or Manager (#)

Parameters

all-vrfs

Optional. Shows local Candidate-BSR configuration information for all VRFs.

vrf <VRF-NAME>

Optional. Shows local Candidate-BSR configuration information for a particular VRF. If the <VRF-NAME> is not specified, it shows information for the default VRF.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Example

Showing local Candidate BSR:

switch# show ip pim bsr local all-vrfs

Status and Counters - PIM-SM Local Candidate-BSR Information

VRF                       : default
C-BSR Admin Status        : This system is a Candidate-BSR
C-BSR Address             : 2.2.2.2/24
C-BSR Priority            : 34
C-BSR Hash Mask Length    : 30
C-BSR Message Interval    : 76
C-BSR Source IP Interface : vlan10

VRF                       : green
C-BSR Admin Status        : This system is a Candidate-BSR
C-BSR Address             : 2.2.2.2/24
C-BSR Priority            : 34
C-BSR Hash Mask Length    : 32
C-BSR Message Interval    : 60
C-BSR Source IP Interface : vlan10