mvrp registration
Syntax
mvrp registration {normal | fixed | forbidden [<VLAN-LIST>]}
no mvrp registration forbidden {<VLAN-LIST>}
Description
Configures the MVRP registrar state which determines how an MVRP participant responds to MRP messages. The default registration mode is normal.
The
no
command removes the specified VLANs from the forbidden list.
Command context
config-if
Parameters
normal
Enables dynamic registration and deregistration of VLANs on the interface, and propagates VLAN information to other switches on the network. Default.
fixed
Disables dynamic deregistration of VLANs and drops received MVRP frames. The interface does not deregister dynamic VLANs or register new dynamic VLANs.
forbidden
Disables dynamic registration of VLANs and drops received MVRP frames. The MVRP participant does not register new dynamic VLANs or re-register a deregistered dynamic VLAN.
<VLAN-LIST>
Disables dynamic registration of VLANs and drops received MVRP frames for specific VLANs only. Normal behavior applies to all other VLANs. Specify the number of a single VLAN, or a series of numbers for a range of VLANs, separated by commas (1, 2, 3, 4), dashes (1-4), or both (1-4,6).
Authority
Administrators
Examples
switch(config)# interface 1/1/1 switch(config-if)# mvrp registration forbidden 10
switch(config)# interface 1/1/1 switch(config-if)# mvrp registration fixed
switch(config)# interface 1/1/1 switch(config-if)# mvrp registration forbidden 1,2,10-20