show mvrp state
Syntax
show mvrp state [<VLAN-ID> | <VLAN-ID> <PORT-NUM>]
[vsx-peer]
Description
Displays the MVRP Registrar and Applicant state machine information for all ports on which MVRP is enabled, or for specific ports.
Command context
Operator (>
) or Manager (#
)
Parameters
<VLAN-ID>
Specifies the number of a VLAN. Range: 1 - 4094.
<PORT-NUM>
Specifies a physical port on the switch. Some switches (such as the Aruba 8400 Switch Series), use the format
member/slot/port
(for example,1/1/1
). Other switches useslot/port
(for example,1/1
).[vsx-peer]
Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.
Authority
Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.
Examples
switch# show mvrp state 1 Configuration and Status - MVRP state for VLAN 1 Port VLAN Registrar Applicant State State ---- ---- -------- --------- 1/1/1 1 MT QA
switch# show mvrp state 10 1/1/1 Configuration and Status - MVRP state for VLAN 10 Port VLAN Registrar Applicant Forbid State State Mode ---- ---- --------- --------- --------- 1/1/1 10 MT LO Yes switch#