`mvrp registration`

Syntax

mvrp registration {normal | fixed | forbidden [<VLAN-LIST>]}

no mvrp registration forbidden {<VLAN-LIST>}

Configures the MVRP registrar state which determines how an MVRP participant responds to MRP messages. The default registration mode is normal.

The no command removes the specified VLANs from the forbidden list.

config-if

normal: Enables dynamic registration and deregistration of VLANs on the interface, and propagates VLAN information to other switches on the network. Default.
fixed: Disables dynamic deregistration of VLANs and drops received MVRP frames. The interface does not deregister dynamic VLANs or register new dynamic VLANs.
forbidden: Disables dynamic registration of VLANs and drops received MVRP frames. The MVRP participant does not register new dynamic VLANs or re-register a deregistered dynamic VLAN.
<VLAN-LIST>: Disables dynamic registration of VLANs and drops received MVRP frames for specific VLANs only. Normal behavior applies to all other VLANs. Specify the number of a single VLAN, or a series of numbers for a range of VLANs, separated by commas (1, 2, 3, 4), dashes (1-4), or both (1-4,6).

Administrators

switch(config)# interface 1/1/1
switch(config-if)# mvrp registration forbidden 10

switch(config)# interface 1/1/1
switch(config-if)# mvrp registration fixed

switch(config)# interface 1/1/1
switch(config-if)# mvrp registration forbidden 1,2,10-20