Keepalive configurations

Task	Command	Example
Configuring keepalive peer source and VRF.	`keepalive peer <IP-ADDR> source <IP-ADDR> [<VRF-NAME>]`	`switch(config-vsx)# keepalive peer 192.168.1.1 source 192.168.1.5 vrf vrf1`
Unconfiguring keepalive.	`no keepalive`	`switch(config-vsx)# no keepalive`
Configuring keepalive UDP port.	`keepalive udp-port <PORT-NUM>`	`switch(config-vsx)# keepalive udp-port 2000`
Restoring default keepalive UDP port.	`no keepalive udp-port`	`switch(config-vsx)# no keepalive udp-port`
Configuring keepalive hello interval.	`keepalive hello-interval <HELLO-INTERVAL>`	`switch(config-vsx)# keepalive hello-interval 3`
Restoring default keepalive hello interval.	`no keepalive hello-interval`	`switch(config-vsx)# no keepalive hello-interval`
Configuring keepalive dead interval.	`keepalive dead-interval <DEAD-INTERVAL>`	`switch(config-vsx)# keepalive dead-interval 10`
Restoring default keepalive dead interval.	`no keepalive dead-interval`	`switch(config-vsx)# no keepalive dead-interval`

Default values: