Viewing PIM information

For some commands, you can specify viewing information by interface or VRF.

Prerequisites
Use these show commands from the Operator (>) or Manager (#) context.
Procedure
To display PIM information, use the following show commands.
  • To view PIM router information, use: show ip pim.

  • To view information about the PIM interfaces configured on the router, use: show ip pim interface.

  • To view information about a PIM interface, use: show ip pim interface <INTERFACE-NAME>.

  • To view PIM packet counter information for an interface, use: show ip pim interface <INTERFACE-NAME> counters.

  • To view PIM neighbor information, use: show ip pim neighbor.

  • To view RP information, use: show ip pim rp-set.

  • To view information for statically configured RP assignments, use: show ip pim rp-set static.

  • To view information for dynamically learned RP assignments, use: show ip pim rp-set learned.

  • To view candidate RP information, use: show ip pim rp-candidate.

  • To view information about BSR candidates in the domain, use: show ip pim bsr.

  • To view information about BSR candidates on the local router, use: show ip pim bsr local.

  • To view information about the elected BSR in the domain, use: show ip pim bsr elected.

  • To view the RPF override configuration, use: show ip pim rpf-override.

  • To view RPF override configuration for a source, use: show ip pim rpf-override source.

  • To view pending joins on a PIM router, use: show ip pim pending.

  • To view multicast routing information, use: show ip mroute or use show ip mroute brief.

  • To view multicast routing information for a group address, use: show ip mroute <GROUP-ADDR>.