Configuring IGMP snooping static groups

Configure IGMP snooping static groups.

Prerequisites

You must be in the VLAN configuration context, as indicated by the switch(config-vlan)# prompt.

Procedure

Configure an IGMP snooping static group on a VLAN using the following command.

ip igmp snooping static-group <MULTICAST-IP-ADDRESS>

For example, the following command configures the IGMP snooping static multicast group as 239.1.1.1 on VLAN 2:

switch# configure terminal
switch(config)# vlan 2
switch(config-vlan)# ip igmp snooping static-group 239.1.1.1

The no form of the command unconfigures the IGMP snooping static group.