`show ip pim`

Syntax

show ip pim [all-vrfs | vrf <VRF-NAME>] [vsx-peer]

Description

Shows the PIM router information. Optionally, you can specify display information by VRF. If no options are specified, it shows information for the default VRF.

Command context

Operator (>) or Manager (#)

Parameters

all-vrfs: Optional. Shows PIM router information on all VRFs.
vrf <VRF-NAME>: Optional. Shows PIM router information for a particular VRF. If the <VRF-NAME> is not specified, it shows information for the default VRF.
[vsx-peer]: Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Example

Showing IP PIM router:

switch# show ip pim

PIM Global Parameters

VRF                          :  default
PIM Status                   :  enable
SPT Threshold                :  enabled