Firmware Update page
From the Firmware Update page, you can see the current, primary and secondary firmware versions and you can upload firmware files.
Uploads are performed through the REST interface.
Once the update starts, it cannot be canceled.
Prior to updating, a message is displayed Are you sure you want to update the primary/secondary image.
Once the firmware upload is completed, a new dialog box is displayed:
New firmware has been successfully uploaded. Verifying and writing system firmware...
You may need to press Reboot on the page or select the Reboot item in the top right System menu for the image to take effect.
Selecting Reboot reboots the switch.
Once you select Reboot, you cannot cancel the request.
After selecting Reboot, you will be prompted to verify that you want to reboot the switch and to choose an image to use when rebooting. For example:
Are you sure you want to reboot the switch? Please choose an Image Primary Image XL.01.01.000X (Same As Running) Secondary Image XL.01.01.000X (Same As Running)