apply policy
Syntax
apply policy <POLICY-NAME> in
no apply policy <POLICY-NAME> inDescription
Applies a policy to the current interface context.
Only one direction (inbound) of policy can be applied to a port at a time, thus using the apply command on an interface with an already-applied policy of the same direction and type will replace the currently applied policy.
The
no form of this command removes a policy from the specified interface.
Command context
config-if
Parameters
<POLICY-NAME>Specifies the policy to apply.
inSpecifies apply the policy to inbound (ingress) traffic.
Authority
Administrators
Examples
Applying a policy to a port:
switch(config)# interface 1/1/1 switch(config-if)# apply policy MY_POLICY in
Removing a policy from a port:
switch(config)# interface 1/1/1 switch(config-if)# no apply policy MY_POLICY in