ip route bfd

Syntax

ip route <DEST-IPV4-ADDR>/<NETMASK> [<NEXT-HOP-IP-ADDR>|<INTERFACE>] bfd
ip route <DEST-IPV4-ADDR>/<NETMASK> [<NEXT-HOP-IP-ADDR>|<INTERFACE>] 

Description

Enables or disables BFD on the specified static route. To disable BFD, issue the command without the bfd option.

Command context

config

Parameters

<DEST-IPV4-ADDR>/<NETMASK>

Specifies the IPv4 route destination.

<NEXT-HOP-IP-ADDR>

Specifies the next hop address for reaching the destination in IPv4 format (x.x.x.x), where x is a decimal number from 0 to 255. You can remove leading zeros. For example, the address 192.169.005.100 becomes 192.168.5.100.

<INTERFACE>

Specifies the next hop as an outgoing interface.

bfd

Enables BFD on the static route. Omit this parameter to disable BFD.

Authority

Administrators

Examples

Enabling BFD on a static route:

switch(config)# interface 1/1/1
switch(config-if)# ip address 20.1.1.2/24
switch(config-if)# no shutdown
switch(config-if)# quit
switch(config)# ip route 192.0.0.0/8 20.1.1.1 bfd

Disabling BFD on a static route:

switch(config)# ip route 192.0.0.0/8 20.1.1.1

Enabling BFD on a static route:

switch(config)# interface 1/1/1
switch(config-if)# ip address 20.1.1.2/24
switch(config-if)# no shutdown
switch(config-if)# quit
switch(config)# ip route 192.0.0.0/8 1/1/1 bfd

Disabling BFD on a static route:

switch(config)# ip route 192.0.0.0/8 1/1/1