lacp mode
Syntax
lacp mode {active | passive}no lacp mode {active | passive}Description
Sets an LACP mode to active or passive.
The
no form of this command sets the LACP mode to
off, returning the LAG to a static mode aggregation.
Command context
config-lag-if
Parameters
activeSpecifies that the local switch will transmit LACP Data Units (LACPDUs) to attempt to negotiate with the remote device.
passiveSpecifies that the local switch will listen for LACPDUs from the remote device for LACP negotiation.
NOTE:
A momentary traffic drop occurs because LACP partners reconverge when changing the mode from active to passive or passive to active.
Authority
Administrators
Examples
Setting the LACP mode to
active:
switch(config)# interface lag 1 switch(config-lag-if)# lacp mode active
Setting the LACP mode to
off:
switch(config)# interface lag 1 switch(config-lag-if)# no lacp mode active