show acounting log
Syntax
show accounting log [last <QTY-TO-SHOW> | all] [vsx-peer]
Description
This
show accounting log
command replaces the
show audit-log
command that is supported only in 10.00 releases.
Command context
Manager (#
)
Parameters
last <QTY-TO-SHOW>
Specifies how many most-recent accounting log records to show for the current boot. Range: 1 to 1000.
all
Selects for showing, all accounting records from the current boot and the previous boot.
[vsx-peer]
Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.
Authority
Administrators
Usage
msg=
element starting with the
rec=
item as follows:
Exec is identified with:
msg='rec=ACCT_EXEC
Command is identified with:
msg='rec=ACCT_CMD
System is identified with:
msg='rec=ACCT_SYSTEM
These elements are shown in context under Examples.
Examples
Showing the accounting log for the last 12 records.
switch# show accounting log last 12 type=USYS_CONFIG msg=audit(May 10 2018 00:52:32.428:79) : msg='rec=ACCT_SYSTEM op=start timezone=UTC user=UNKNOWN auth-method=LOCAL auth-type=LOCAL service=system event=sys_acct reason="System-accounting-ON" hostname=UNKNOWN addr=0.0.0.0 res=success' ---- type=USER_START msg=audit(May 10 2018 00:52:47.611:80) : msg='rec=ACCT_EXEC op=start timezone=UTC user=admin priv-lvl=15 auth-method=LOCAL auth-type=LOCAL service=shell hostname=8320 addr=192.168.1.20 res=success' ---- type=USYS_CONFIG msg=audit(May 10 2018 00:52:47.614:81) : msg='rec=ACCT_CMD op=stop timezone=UTC user=admin priv-lvl=15 auth-method=LOCAL auth-type=LOCAL service=shell data="enable" hostname=8320 addr=192.168.1.20 res=success' ---- type=USYS_CONFIG msg=audit(May 10 2018 00:52:50.851:82) : msg='rec=ACCT_CMD op=stop timezone=UTC user=admin priv-lvl=15 auth-method=LOCAL auth-type=LOCAL service=shell data="configure" hostname=8320 addr=192.168.1.20 res=success' ---- type=USYS_CONFIG msg=audit(May 10 2018 00:52:53.427:83) : msg='rec=ACCT_CMD op=stop timezone=UTC user=admin priv-lvl=15 auth-method=LOCAL auth-type=LOCAL service=shell data="interface 1/1/3" hostname=8320 addr=192.168.1.20 res=success' ---- type=USYS_CONFIG msg=audit(May 10 2018 00:52:54.447:84) : msg='rec=ACCT_CMD op=stop timezone=UTC user=admin priv-lvl=15 auth-method=LOCAL auth-type=LOCAL service=shell data="no shutdown" hostname=8320 addr=192.168.1.20 res=success' ---- type=USYS_CONFIG msg=audit(May 10 2018 00:52:58.131:85) : msg='rec=ACCT_CMD op=stop timezone=UTC user=admin priv-lvl=15 auth-method=LOCAL auth-type=LOCAL service=shell data="ip address 10.10.13.1/24" hostname=8320 addr=192.168.1.20 res=success' ---- type=USYS_CONFIG msg=audit(May 10 2018 00:52:59.468:86) : msg='rec=ACCT_CMD op=stop timezone=UTC user=admin priv-lvl=15 auth-method=LOCAL auth-type=LOCAL service=shell data="exit" hostname=8320 addr=192.168.1.20 res=success' ---- type=USYS_CONFIG msg=audit(May 10 2018 00:53:10.204:92) : msg='rec=ACCT_CMD op=stop timezone=UTC user=admin priv-lvl=15 auth-method=LOCAL auth-type=LOCAL service=shell data="exit" hostname=8320 addr=192.168.1.20 res=success' ---- type=USER_END msg=audit(May 10 2018 00:53:10.205:93) : msg='rec=ACCT_EXEC op=stop timezone=UTC user=admin priv-lvl=15 auth-method=LOCAL auth-type=LOCAL service=shell hostname=8320 addr=192.168.1.20 res=success' ---- type=USYS_CONFIG msg=audit(May 10 2018 00:53:44.472:94) : msg='rec=ACCT_CMD op=stop timezone=UTC user=admin priv-lvl=15 auth-method=LOCAL auth-type=LOCAL service=shell data="no aaa accounting all default" hostname=8320 addr=0.0.0.0 res=success' ---- type=USYS_CONFIG msg=audit(May 10 2018 00:53:44.473:95) : msg='rec=ACCT_SYSTEM op=stop timezone=UTC user=UNKNOWN auth-method=LOCAL auth-type=LOCAL service=system event=sys_acct reason="System-accounting-OFF" hostname=UNKNOWN addr=0.0.0.0 res=success'