`show sflow`

Syntax

show sflow [interface <INTERFACE-NAME>] [vsx-peer]

Description

Shows sFlow configuration settings and statistics for all interfaces, or for a specific interface

Command context

Manager (#)

Parameters

interface <INTERFACE-NAME>: Specifies the name of an interface on the switch.
[vsx-peer]: Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.

Authority

Administrators

Examples

Showing sFlow information for all interfaces:

switch# show sflow
sFlow Global Configuration
-----------------------------------------
sFlow                         enabled
Collector IP/Port/Vrf         10.0.0.2/6343/default
                              10.0.0.3/6400/default
Agent Address                 10.0.0.1
Sampling Rate                 1024
Polling Interval              30
Header Size                   128
Max Datagram Size             1400

sFlow Status
-----------------------------------------
Running - Yes

sFlow Statistics
-----------------------------------------
Number of Samples             200

- Agent address is not configured.

Showing sFlow information for interface 1/1/1:

switch# show sflow 1/1/1
sFlow configuration - Interface 1
-----------------------------------------
sFlow                         enabled
Sampling Rate                 1024
Number of Samples             30