neighbor allowas-in
Syntax
neighbor {<IP-ADDRESS>|<PEER-GROUP-NAME>} allowas-in <NUMBER>
no neighbor {<IP-ADDRESS>|<PEER-GROUP-NAME>} allowas-in <NUMBER>Description
Specifies the number of times that the AS path of a received route may contain the AS number of the recipient BGP speaker and still be accepted. When this configuration is applied for a peer-group, all the neighbors that are part of the peer-group will inherit this feature.
The
no form of this command restores the default state, which is to reject as a loop any route where the path contains the speaker AS number.
Command context
config-router
Parameters
<IP-ADDRESS>Specifies an IP address.
<PEER-GROUP-NAME>Specifies a peer group.
<NUMBER>Value of allowas-in. Range: 1-10.
Authority
Administrators
Examples
switch(config-router)# neighbor 1.1.1.1 allowas-in 5 switch(config-router)# no neighbor 1.1.1.1 allowas-in
switch(config-router)# neighbor PG allowas-in 5 switch(config-router)# no neighbor PG allowas-in