bgp cluster id
Syntax
bgp cluster-id {<IP-ADDRESS> | <ID>}
no bgp cluster-id {<IP-ADDRESS> | <ID>}Description
Specifies the cluster ID to be used when the BGP router is used as a route-reflector. The cluster ID default is the router ID.
Any changes in BGP configuration are applied by restarting the current BGP sessions in the VRFs.
The
no form of this command restores default behavior which uses the router ID as the cluster ID.
Command context
config-router
Parameters
<IP-ADDRESS>Specifies the cluster ID in IP address format.
<ID>Specifies the cluster ID as 32 bit quantity. Range: 1-4294967295.
Authority
Administrators
Examples
switch(config-router)# bgp cluster-id 2.2.2.2 All current BGP sessions in VRF default will be restarted. Do you want to continue (y/n)?
switch(config-router)# no bgp cluster-id 2.2.2.2 All current BGP sessions in VRF default will be restarted. Do you want to continue (y/n)?