show ip pim interface <INTERFACE-NAME> counters
Syntax
show ip pim interface <INTERFACE-NAME> counters [vsx-peer]
Description
Shows the PIM packet counters information for the specified interface.
Command context
Operator (>
) or Manager (#
)
Parameters
<INTERFACE-NAME>
Specifies show information for the interface.
[vsx-peer]
Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.
Authority
Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.
Example
Showing PIM packet counters:
switch# show ip pim interface vlan1 counters Interface : vlan1 VRF : default Rx Counters : Hello 4 State Refresh 0 Join/Prune 1 RPadv 0 Graft 0 GraftAck 0 Assert 0 Bsm 0 Tx Counters : Hello 9 State Refresh 0 Join/Prune 0 RPadv 0 Graft 0 GraftAck 0 Assert 0 Bsm 0 Invalid Rx Counters : Hello 0 State Refresh 0 Join/Prune 0 RPadv 0 Graft 0 GraftAck 0 Assert 0 Bsm 0