bfd <IPV4-ADDR>

Syntax

bfd <IPV4-ADDR>

no bfd <IPV4-ADDR>

Description

Enables BFD under VRRP for the specified IP address. BFD is asynchronous and echo mode is supported.

The no form of this command disables BFD under VRRP for the specified IP address.

Command context

config-if-vrrp

Parameters

<IPV4-ADDR>

Specifies the address on which to enable BFD in IPv4 format (x.x.x.x), where x is a decimal number from 0 to 255. You can remove leading zeros. For example, the address 192.168.005.100 becomes 192.168.5.100.

Authority

Administrators

Examples

Enabling BFD on the address 10.0.0.1 on VRRP 1:

switch(config)# interface 1/1/1
switch(config-if)# vrrp 1 address-family ipv4
switch(config-if-vrrp)# bfd 10.0.0.1

Disabling BFD on the address 10.0.0.1 on VRRP 1:

switch(config)# interface 1/1/1
switch(config-if)# vrrp 1 address-family ipv4
switch(config-if-vrrp)# no bfd 10.0.0.1