show arp timeout
Syntax
show arp timeout [<INTERFACE>][vsx-peer]
Description
Shows the age-out period for each ARP (Address Resolution Protocol) entry for a port, LAG, or VLAN interface.
Command context
Operator (>
) or Manager (#
)
Parameters
<INTERFACE>
Specifies a physical port, VLAN, or LAG on the switch. Some switches (such as the Aruba 8400 Switch Series), use the format
member/slot/port
(for example,1/1/1
). You can also useslot/port
(for example,1/1
).[vsx-peer]
Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.
Authority
Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.
Examples
Showing ARP timeout information for a VLAN:
switch# show arp timeout vlan4
Showing ARP timeout information for a port:
switch# show arp timeout 1/1/1 ARP Timeout: ------------------ Port VRF Timeout 1/1/1 default 600