`show interface <VLAN-NAME>`

Syntax

show interface <VLAN-NAME> [vsx-peer]

Description

Displays a virtual IPv4/IPv6 and MAC configured for active-active routing.

Command context

Operator (>) or Manager (#)

Parameters

<VLAN-NAME>: Specifies the VLAN name. Syntax: string
[vsx-peer]: Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Example

switch# show int vlan100

Interface vlan100 is up
 Admin state is up
 Hardware: Ethernet, MAC Address: 48:0f:cf:af:c1:9e
 IPv4 address 192.168.1.1/24
 active gateway 192.168.1.253 00:00:00:00:00:01
 active gateway fe80::01 00:00:00:01:00:01
 RX
       L3:
            ucast: 0 packets, 0 bytes
            mcast: 8 packets, 812 bytes
 TX
       L3:
            ucast: 2 packets, 80 bytes
            mcast: 0 packets, 0 byte