class {ip|ipv6|mac} <CLASS-NAME> resequence
Syntax
class {ip|ipv6|mac} <CLASS-NAME> resequence <STARTING-SEQUENCE-NUMBER> <INCREMENT>Description
Resequence numbering in an IPv4, IPv6, or MAC class.
Command context
config
Parameters
{ip|ipv6|mac} <CLASS-NAME>Specifies the class where you want to resequence class entries.
<STARTING-SEQUENCE-NUMBER>Specifies the sequence number to start resequencing from.
<INCREMENT>Specifies how much to increment the sequence numbers by.
Authority
Administrators
Examples
Resequencing an IPv4 class:
switch(config)# class ip MY_IP_CLASS resequence 1 10
switch(config)# do show class
Type Name
Sequence Comment
Action L3 Protocol
Source IP Address Source L4 Port(s)
Destination IP Address Destination L4 Port(s)
Additional Parameters
-------------------------------------------------------------------------------
IPv4 MY_IP_CLASS
1 match igmp
any
any
11 ignore udp
any
any
21 match tcp
192.168.0.1
192.168.0.2
Resequencing an IPv6 class:
switch(config)# class ipv6 MY_IPV6_CLASS resequence 1 1
switch(config-class-ipv6)# exit
switch(config)# do show class
Type Name
Sequence Comment
Action L3 Protocol
Source IP Address Source L4 Port(s)
Destination IP Address Destination L4 Port(s)
Additional Parameters
-------------------------------------------------------------------------------
IPv6 MY_IPV6_CLASS
1 match any
any
1020::
2 ignore udp
any
any
Resequencing a MAC class:
switch(config)# class mac MY_MAC_CLASS resequence 1 1
switch(config)# do show class
Type Name
Sequence Comment
Action EtherType
Source MAC Address
Destination MAC Address
Additional Parameters
-------------------------------------------------------------------------------
MAC MY_MAC_CLASS
1 match any
any
any
2 ignore arp
any
any