`show vsx config-consistency`

Syntax

show vsx config-consistency [vsx-peer]

Description

Displays the VSX global configuration consistency between two VSX switches.

NOTE:

This show vsx config-consistency command replaces the show mclag config-consistency command that is supported only in 10.00 releases.

Command context

Operator (>) or Manager (#)

Parameters

[vsx-peer]: Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Example

switch# show vsx config-consistency
Configurations                          Local                             Peer
--------------------------------------------------------------------------------
software version                        0.1.0                             0.1.0
ISL hello interval                      1                                 1
ISL dead interval                       5                                 5
ISL hold interval                       0                                 0
Keepalive hello interval                1                                 1
Keepalive dead interval                 3                                 3
Keepalive UDP port                      7678                              7678

ISL VLAN list
1,100
Peer ISL VLAN list
1,10
Local VSX active-forwarding enabled interface-vlans
2 5-9
Peer VSX active-forwarding enabled interface-vlans
2 5-10