show ip interface

Syntax

show ip interface <INTERFACE-NAME> [vsx-peer]

Description

Shows status and configuration information for an IPv4 interface.

Command context

Manager (#)

Parameters

<INTERFACE-NAME>

Specifies the name of the interface on the switch. Some switches (such as the Aruba 8400 Switch Series), use the format member/slot/port (for example, 1/1/1). Other switches, use slot/port (for example, 1/1).

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Examples

switch# show ip interface 1/1/1

Interface 1/1/1 is up
 Admin state is up
 Hardware: Ethernet, MAC Address: 70:72:cf:fd:e7:b4
 IPv4 address 192.168.1.1/24
 MTU 1500
 RX
          0 packets, 0 bytes
 TX
          0 packets, 0 bytes