keepalive dead-interval
Syntax
keepalive dead-interval <DEAD-INTERVAL>no keepalive dead-intervalDescription
Sets the dead-interval for keepalive protocol. The dead interval is the amount of time to wait for hellos from a peer before declaring the peer to be dead. The default dead-interval is 3 seconds.
The
no form of this command sets the interswitch link dead-interval to the default of 3 seconds.
NOTE:
This
keepalive dead-interval command replaces the
mclag keepalive dead-interval
<DEAD-INTERVAL> command that is supported only in 10.00 releases.
Command context
config-vsx
Parameters
dead-interval <DEAD-INTERVAL>Specifies the dead-interval in seconds. Range: 2 to 20 seconds
Authority
Administrators
Examples
Setting the dead-interval for keepalive protocol to 10 seconds:
switch(config)# vsx switch(config-vsx)# keepalive dead-interval 10
Setting the dead-interval for keepalive protocol to the default:
switch(config)# vsx switch(config-vsx)# no keepalive dead-interval