show lldp configuration
Syntax
show lldp configuration [<INTERFACE-NAME>] [vsx-peer]Description
Shows LLDP configuration settings for all interfaces or a specific interface.
Command context
Manager (#)
Parameters
<INTERFACE-NAME>Specifies the interface for which to show configuration information. Some switches (such as the Aruba 8400 Switch Series), use the format
member/slot/port(for example,1/1/1). Other switches useslot/port(for example,1/1).[vsx-peer]Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.
Authority
Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.
Example
Showing configuration settings for all interfaces:
switch# show lldp configuration LLDP Global Configuration ========================= LLDP Enabled : Yes LLDP Transmit Interval : 8 LLDP Hold Time Multiplier : 4 LLDP Transmit Delay Interval : 2 LLDP Reinit Time Interval : 2 TLVs Advertised =============== Management Address Port Description Port VLAN-ID System Capabilities System Description System Name LLDP Port Configuration ======================= PORT TX-ENABLED RX-ENABLED ----------------------------------------------- 1/1/1 Yes Yes 1/1/2 Yes Yes 1/1/3 Yes Yes 1/1/4 Yes Yes 1/1/5 Yes Yes ..........................................................
This example shows configuration settings for interface 1/1/1.
switch# show lldp configuration 1/1/1 LLDP Global Configuration ========================= LLDP Enabled : Yes LLDP Transmit Interval : 8 LLDP Hold Time Multiplier : 4 LLDP Transmit Delay Interval : 2 LLDP Reinit Time Interval : 2 LLDP Port Configuration ======================= PORT TX-ENABLED RX-ENABLED ---------------------------------------------- 1/1/1 Yes Yes