show lldp configuration

Description

Shows LLDP configuration settings for all interfaces or a specific interface.

Command context

Manager (#)

Parameters

<INTERFACE-NAME>

Specifies the interface for which to show configuration information. Some switches (such as the Aruba 8400 Switch Series), use the format member/slot/port (for example, 1/1/1). Other switches use slot/port (for example, 1/1).

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Example

Showing configuration settings for all interfaces:

switch# show lldp configuration

LLDP Global Configuration
=========================

LLDP Enabled                 : Yes
LLDP Transmit Interval       : 8
LLDP Hold Time Multiplier    : 4
LLDP Transmit Delay Interval : 2
LLDP Reinit Time Interval    : 2

TLVs Advertised
===============

Management Address
Port Description
Port VLAN-ID
System Capabilities
System Description
System Name

LLDP Port Configuration
=======================

PORT           TX-ENABLED          RX-ENABLED
-----------------------------------------------
1/1/1          Yes                 Yes
1/1/2          Yes                 Yes
1/1/3          Yes                 Yes
1/1/4          Yes                 Yes
1/1/5          Yes                 Yes
..........................................................

This example shows configuration settings for interface 1/1/1.

switch# show lldp configuration 1/1/1

LLDP Global Configuration
=========================
LLDP Enabled                 : Yes
LLDP Transmit Interval       : 8
LLDP Hold Time Multiplier    : 4
LLDP Transmit Delay Interval : 2
LLDP Reinit Time Interval    : 2

LLDP Port Configuration
=======================

PORT           TX-ENABLED          RX-ENABLED
----------------------------------------------
1/1/1          Yes                 Yes