Verifying the IPv4 ACL application configuration example
Run this verification for the configuration created in Configuring an ACL for IPv4.
Procedure
To verify the configuration, enter:
switch# show access-list ip FILTER_TO_HOST_B
Type Name
Sequence Comment
Action L3 Protocol
Source IP Address Source L4 Port(s)
Destination IP Address Destination L4 Port(s)
Additional Parameters
-------------------------------------------------------------------------
IPv4 FILTER_TO_HOST_B
10 deny any
192.168.1.2
192.168.2.2
Logging: enabled
Hit-counts: enabled
20 permit any
any
any
-------------------------------------------------------------------------