show ip igmp vlan config
This command is used to show the IGMP configuration for a VLAN.
Syntax
show ip igmp vlan (vid) config
Example output
Below is the output when version is set to 3.
switch(vlan-60)# show ip igmp vlan 60 config
IGMP Service VLAN Config
VLAN ID : 60
VLAN NAME : VLAN60
IGMP Enabled : Yes
Querier Allowed [Yes] : No
IGMP Version [2] : 3
Strict Mode : No
Last Member Query Interval (Seconds) [1] : 1
Querier Interval [125] : 125
Query Max. Response Time (Seconds) [10] : 10
Robustness Count [2] : 2
Port Type | Port Mode Forced Fast Leave Fast Leave
------- ---------- + --------- ----------------- ----------
1 1000T | Auto No Yes
2 1000T | Auto No Yes
23 1000T | Auto No Yes