Enable BFD session

Syntax


bfd enable| disable echo-src-ip-address
no bfd enable| disable echo-src-ip-address

Description

Configure Bidirectional Forwarding Detection (BFD) global settings.

options

enable: Enable BFD globally.
disable: Disable BFD globally.
echo-src-ip-address: Set the source IP address for BFD echo packets transmitted by the switch.

Enable BFD session: Configuration

; J9850A Configuration Editor; Created on release #KB.16.02.0000x
; Ver #0b:fc.59.f4.7b.ff.ff.fc.ff.ff.3f.ef:0d
hostname "switch"
module A type j9989a
module F type j9987a
no rest-interface
password minimum-length 8
ip routing
snmp-server community "public" unrestricted
oobm
   ip address dhcp-bootp
   exit
bfd enable
vlan 1
   name "DEFAULT_VLAN"
   untagged A1-A24,F1-F24
   ip address dhcp-bootp
   exit
no allow-v2-modules

switch# show bfd-session


Bidirectional Forwarding Detection (BFD) Information

  Admin Status   : Enabled
  Echo source IP :

  Session  VLAN  Source IP  Destination IP  Echo  State  Application
 -------- ------ ---------- ----------- --- ----- ------ -----------

switch# show bfd-session 1

BFD Session Information
BFD session 1 not found