Configuration commands
Enable IP directed broadcast forwarding for Wake-on-LAN support. An optional ACL can also be applied to control what packets are forwarded.
Syntax
switch(config)# ip directed-broadcast [access-group <ACL-ID>]
Example configuration
switch(config)# ip directed-broadcast [access-group] <wol-acl>
Example running configuration
; J9573A Configuration Editor; Created on release #KA.15.18.0000x ; Ver #06:7c.fd.ff.ff.3f.ef:57 hostname "switch-name" module 1 type j9573x ip access-list extended "wol-acl" ....10 permit ip 192.168.1.10 0.0.0.0 182.168.1.1 0.0.0.255 ....exit ip directed-broadcast access-group "wol-acl" ip routing snmp-server community "public" unrestricted oobm ....ip address dhcp-bootp exit vlan 1 ....name "DEFAULT_VLAN" ....no untagged 1,23-24 ....untagged 2-22,25-26 ....ip address dhcp-bootp ....exit vlan 10 ....name "VLAN10" ....untagged 1 ....ip address 192.168.1.1 255.255.255.0 ....exit vlan 20 ....name "VLAN20" ....untagged 23-24 ....ip address 182.168.1.1 255.255.255.0 ....exit
NOTE:
If specified ACL ID is non-existing, it is not possible to associate with IP Directed Broadcast. An error will be shown to the user.
It is not allowed to delete an ACL which is associated with IP Directed Broadcast and on attempt, an error message will be shown to user.
The same ACL wol-acl can be applied to any other interface like VLAN, port and tunnel.
<wol-acl> entries
ip access-list extended <wol-acl> 10 permit ip 192.168.1.1 255.255.255.0 182.168.1.1 55.255.255.0 20 deny ip 172.168.1.1 255.255.255.0 162.168.1.1 255.255.255.0 Exit