Error Log

On configuring Distributed Trunking on a VLAN where PIM-SM is already configured the following errors may appear.

Table 8: Error Log
Feature	Error	Message
Configure DT when PIM enabled	`SWITCH_ERRORMSG_DT_CANNOT_CONFIGURE_DT`	Cannot configure Distributed Trunking on a VLAN port that has PIM-SM configured.
Configure DT when PIM enabled	`SWITCH_ERRORMSG_DT_CANNOT_CONFIGURE_DT_ON_PIM_DEFAULT_VLAN`	Cannot configure Distributed Trunking because PIM-SM is enabled on DEFAULT VLAN.
Configure PIM-SM when DT enabled	`SWITCH_ERRORMSG_DT_CANNOT_CONFIGURE_PIM`	Cannot configure PIM-SM on a VLAN that has Distributed Trunking configured.
V1 module with PIM-DM DT	`Enabling V1 module with PIM-DM & DT are enabled on the same VLAN.`	Cannot enable V1 modules when PIM-DM and Distributed Trunking are configured on the same VLAN.
	`Enabling PIM-DM or DT when V1 module is allowed.`	PIM-DM and Distributed Trunking cannot be configured on the same VLAN when V1 modules are enabled.

NOTE:

Distributed Trunking between different type of switches is not supported. If the switch platforms do not match, an error message will return similar to inconsistent criteria.