Show IP PIM
Syntax
show ip pim neighbors
Show PIM protocol operational and configuration information.
show ip pim
PIM Global Parameters PIM Status : Enabled State Refresh Interval (sec) : 60 Join/Prune Interval (sec) : 60 SPT Threshold : Enabled Traps : none
show ip pim neighbors
Lists PIM neighbor information for all PIM neighbors connected to the routing switch.
- neighbor
Show PIM neighbor information.
- IP Address
Lists the IP address of a neighbor multicast router.
- VLAN
Lists the VLAN through which the routing switch connects to the indicated neighbor.
- Up Time
Shows the elapsed time during which the neighbor has maintained a PIM route to the routing switch.
- Expire Time
Indicates how long before the router will age-out a PIM neighbor/adjacency relationship on the specified interface (VLAN.) When a neighbor/adjacency expires and that neighbor was the last one on the interface, multicast data and state refresh packets will no longer be sent out that interface. Receipt of a periodic PIM hello message from the neighboring PIM router resets this timer to the hold time value stored in the hello message. If the ip-addr is specified then detailed information for the specified neighbor is shown.
IM Neighbors IP Address VLAN Up Time (sec) Expire Time (sec) --------------- ---- ------------------ ------------------ 20.1.1.2 20 193 83