Viewing RIP peer information

To display RIP peer information, enter the show ip rip peer command at any context level.

The resulting display will appear similar to the following:

Example of show IP rip peer output

switch# show ip rip peer
RIP peer information
 IP Address      Bad routes  Last update timeticks
 --------------- ----------- ---------------------
 100.1.0.100     0           1
 100.2.0.100     0           0
 100.3.0.100     0           2
 100.10.0.100    0           1

This display lists all neighboring routers from which the routing switch has received RIP updates. The following fields are displayed:

IP address: IP address of the RIP peer neighbor.
Bad routes: The number of route entries that were not processed for any reason.
Last update timeticks: How many seconds have passed since the routing switch received an update from this peer neighbor.

To show the RIP peer information for a specific peer with IP address 100.1.0.100, enter show ip rip peer 100.1.0.100.

Example of show IP rip peer ip-addr output

switch# show ip rip peer 100.0.1.100
RIP peer information for 100.0.1.100
  IP Address : 100.1.0.100
  Bad routes : 0
  Last update timeticks : 2

This display lists information in the fields described above (IP address, Bad routes, Last update timeticks.)