tftp client|server
Client and server TFTP for IPv6 is enabled by default on the switch. However, if it is disabled, you can re-enable it by specifying TFTP client or server functionality with the
tftp
client|server
command.
Syntax
tftp [
client
]| server
[ listen oobm | data
|
both
]
no tftp [
client
]| server
[ listen oobm | data
|
both
]
Description
Use TFTP client functionality to access IPv4- or IPv6-based TFTP servers in the network to receive downloaded files.
Use TFTP server functionality on the switch to be accessed by other IPv4 or IPv6 hosts requesting to upload files.
For switches that have a separate OOBM port, the
listenparameter in aserverconfiguration allows you to specify whether transfers take place through the OOBM interface, the data interface, or both. For more information on OOBM, see the ArubaOS-Switch Management and Configuration Guide.
Options
The
no form of the command disables the client or server functionality.
Default: TFTP client and server functionality enabled
To disable all TFTP client or server operation on the switch except for the auto-TFTP feature, enter the
no tftp [ client
| server
]
command. To re-enable TFTP client or server operation, re-enter the
tftp [ client
| server ]
command. (Entering
no tftp without specifying client or server affects only the client functionality. To disable or re-enable the TFTP server functionality, you must specify
server
in the command.)
When TFTP is disabled, instances of TFTP in the CLI
copy command and the Menu interface "Download OS" screen become unavailable. The
no tftp [ client|server
] command does not affect auto-TFTP operation.